The Swiss voice in the world since 1935
Top stories
Stay in touch with Switzerland

3D printing could meet rising demand for heart valves 

artificial heart valves
The silicone heart valve can be tailored more precisely to the patient. Researchers first determine the individual shape and size of the leaky heart valve using computer tomography or magnetic resonance imaging. Fergal Coulter / ETH Zurich

If Swiss researchers have their way, artificial heart valves could simply come out of 3D printers in future. Switzerland's Federal Institute of Technology (ETHZ), along with South African company  Straight Access Technologies (SAT) has developed a silicone replacement for the heart valves used today. However, it will take at least ten years before the custom-made artificial heart valves can be used. 

Heart valves ensure that the blood only flows in one direction. If they are leaky, constricted, dilated or even torn, the blood runs back, which puts a heavy strain on the heart. Cardiac arrhythmias or heart failure can occur in the worst-case scenario, writes ETH Zurich in a press releaseExternal link

Experts expect that in the coming decades the demand for artificial heart valves will increase sharply in large parts of the world. This is due to ageing, lack of exercise and poor nutrition. Replacement heart valves from the 3D printer could help meet this demand. 

Tailor-made replacement 

The new silicone model, which researchers announced in the latest issue of the science journal “Matters”, has several advantages over the replacement flaps currently in use. These implants are mainly made of metal parts or animal tissue. 

The flap can now be tailor-made. The researchers first determine the individual shape and size of the leaking valve and then create a computer simulation with which they can calculate the forces and deformations acting on the implant. 

Saving time and money 

Manufacturing artificial heart valves has so far been expensive and time-consuming, notes the report. For example, manual production takes a few working days. A flap from the 3D printer only takes about one and a half hours to manufacture. 

The scientists start by create a negative impression which has the shape of a three-pointed crown. Silicone ink is sprayed onto this, resulting in the thin flap wings. In a further step, a pattern of thin threads is printed onto the surface with tough silicone paste. These correspond to the collagen fibres that run through the natural heart valves. 

The same procedure is used to create the blood vessel root connected to the valve, writes ETHZ. Finally, it is covered with a net-shaped stent, which is necessary for connecting the replacement valve to the bloodstream. 

According to ETHZ, the first tests were very promising. The aim of the materials researchers is now to increase the service life of such replacement valves to 10 to 15 years. That’s how long the current models will last. However, it will take at least another ten years before the artificial silicone valves can actually be used. The products still have to go through numerous clinical trials.  

Popular Stories

Most Discussed

News

Millionaires prioritise well-being over material possessions

More

High-net-worth individuals prioritise well-being over material possessions

This content was published on The priorities of wealthy private individuals have shifted against the backdrop of ongoing geopolitical tensions and trade disputes. While spending on luxury goods is declining, demand for travel and experiences is unabated.

Read more: High-net-worth individuals prioritise well-being over material possessions
Spanish flu: virus genome deciphered a century later

More

Swiss researchers sequence genome of 1918 Spanish flu virus

This content was published on Researchers from the Universities of Basel and Zurich (UZH) have sequenced the genome of the Spanish flu virus, thanks to a sample taken from an 18-year-old Swiss boy who died in the city on the Limmat in 1918, when the pandemic spread around the world.

Read more: Swiss researchers sequence genome of 1918 Spanish flu virus
Three inmates attempt to escape from Sion prison

More

Prison escape foiled by Swiss police

This content was published on Three inmates attempted to escape from Sion prison on Sunday morning. Their capture required a major police operation.

Read more: Prison escape foiled by Swiss police
The start of the holiday season means long traffic jams on the Gotthard

More

Gotthard traffic queue hits 11km at start of holiday season

This content was published on The start of the summer holidays saw a long traffic jam in front of the Gotthard tunnel on Saturday. Traffic jams between Erstfeld and Göschenen in canton Uri were up to 11 kilometres long early in the morning.

Read more: Gotthard traffic queue hits 11km at start of holiday season

In compliance with the JTI standards

More: SWI swissinfo.ch certified by the Journalism Trust Initiative

You can find an overview of ongoing debates with our journalists here . Please join us!

If you want to start a conversation about a topic raised in this article or want to report factual errors, email us at english@swissinfo.ch.

SWI swissinfo.ch - a branch of Swiss Broadcasting Corporation SRG SSR

SWI swissinfo.ch - a branch of Swiss Broadcasting Corporation SRG SSR